Kerosene Forced Air Heater - MH-0190-0M11
MH-0190-0M11
The portable kerosene forced air heaters provide dependable heat for large areas. They feature built-in temperature control and sure start ignition.
Motor
Heavy-duty, cast aluminum enclosed electric motor
Burner Head
One-piece cast aluminum
Components
Easy assembly · Built-in temperature control thermostat with control dial · High performance fan · Integral overheat and flame-out safety · Fuel gauge · Sure start ignition for cold temperature starts · Dual connector ignition · Flat-free tires
Factory Tested for Multiple Fuels
Kerosene · JP8/Jet A fuel · No. 1 or No. 2 fuel oil · No. 1 or No. 2 diesel fuel · Not approved for bio-fuel
Important Notes
-Not for use in residential living areas or inadequately ventilated areas
-Proper ventilation required during operation
-Must be plugged into an approved standard electrical outlet for operation
Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.
Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.
Specifications
-
Heat Output
190,000 BTU
-
Hot-Air Flow
409 CFM
-
Air Pump Pressure
7.5 PSI
-
AC Power
120V, 60Hz, 2.5 Amps
-
Motor Size
1/2 HP
-
Fuel Tank Capacity
13.2 gallons
-
Fuel Consumption
1.37 gal./hr.
-
Max. Operating Hours
10.0 hours
-
Heating Area
4,750 sq. ft.
-
Multi-Fuel Capable
Yes
-
Digital Temp. Read-Out
Yes
-
Error Indicator Read-Out
Yes
Weights & Dimensions
-
Net Weight
62.00 lbs.
-
Shipping Weight
70.00 lbs.
-
Length
41.00 in.
-
Width
17.00 in.
-
Height
22.00 in.
Options
- No options
Warranty Information
- 1 Year