HG Series Natural Gas/LP Belt Drive - HG-3004-3208
HG-3004-3208
Providing maximum cleaning power, the stationary HG Series offers the convenience of a steady fuel source, making it the perfect solution for wash bays.
Pump
Factory preset trapping unloader · Thermal relief valve · Adjustable high pressure detergent injector
Motor
Open drip-proof motor electric motor with thermal overload protection
Frame
Powder coated steel side panels and frame
Components
Natural gas or LP gas-fired (vapor only) natural draft with aspirating-type burner, 10-inch stack · 24 volt control system · 1/2-inch schedule 80-coil heat exchanger · Electronic ignition with an intermittent pilot · Adjustable thermostat
Miscellaneous
Maximum outlet temperature is 200°F (250°F/121°C outlet temperature with steam option)
Unit Includes
Quick connect nozzles - 0°, 15°, 25° and 40° · 50-foot x 3/8-inch steel wire-braided hose · Adjustable pressure insulated dual lance with trigger gun
Specifications
-
PSI
3000
-
GPM
3.9
-
Horsepower/Motor
8.0 HP, 208V, 3Ø, 23.0A
-
Pump
General
-
Natural Gas BTU Per Hour
338,000
-
LP Gas BTU Per Hour
326,000
-
Draft Diverter
21 in.
Weights & Dimensions
-
Net Weight
758.00 lbs.
-
Shipping Weight
878.00 lbs.
-
Length
56.50 in.
-
Width
29.00 in.
-
Height
49.75 in.
Options
-
HX-0104 K7 Unloader, Flow Activated - Auto Start/Stop N/A
Converts pressure trapping unloader system to flow actuated K7 unloader. Pressure is not trapping in the discharge line when trigger is released
-
HX-0105 Liquid Propane - Vapor Only
Converts natural gas pressure washer to operate on liquid propane (vapor only)
-
HX-0106 Hour Meter
Displays the number of hours unit has been in operation
-
HX-0107 Time Delay Shutdown
Timer will shut unit off automatically when trigger gun is released and timer reaches setting **Consult factory before ordering this option.**
-
HX-0108 (1) Remote Station - Auto Start/Stop N/A
Adds control box which may be mounted away from unit to control on/off, burner and soap injection **Consult factory before ordering this option.**
-
HX-0109 Time Delay Shutdown and First Remote Box
Timer will shut unit off automatically when trigger gun is released and timer reaches setting; Adds control box which may be mounted away from unit to control on/off, burner and soap injection **Consult factory before ordering this option.**
-
HX-0110 Additional Remotes - Up To 3
Additional remotes that may be added to unit after the first remote is installed
-
HX-0111 Auto Start/Stop
When trigger gun is released, the timer will turn unit off; when trigger gun is pulled unit will restart
-
HX-0121 250°F Steam Upgrade
Steam option adjusts unloader valve counter-clockwise increasing outlet temperature to 250°F while lowering system pressure
-
HX-0124 Auto Start/Stop and First Remote Option
When trigger gun is released timer will turn unit off, when trigger gun is pulled unit will restart; Adds control box which may be mounted away from unit to control on/off, burner and soap injection
-
HX-0296 Programmable Logic Controller
Includes auto start/ stop and timed lockout
-
HX-0297 Programmable Logic Controller with First Remote
Includes auto start/stop, timed lockout and detergent solenoid
-
HX-0299 Auto Start/Stop and First Remote Option - Metal Control Box
When trigger gun is released, the timer will turn unit off; when trigger gun is pulled, unit will restart; Adds metal control box, may be mounted away from unit to control on/off, burner and soap injection
-
HX-0288 (1) Remote Station (Auto Start/Stop Not Available), Metal Control Box
Adds plastic control box with rocker switches, can be mounted away from unit to control on/off, burner and soap injection **Consult factory before ordering this option**
-
HX-0289 Time Delay Shutdown and First Remote, Metal Control Box
Timer will shut unit off automatically when trigger gun is released and timer reaches setting; adds metal control box with rocker switches, can be mounted away from unit to control on/off, burner and soap injection **Consult factory before ordering this option**
-
HX-0290 Addition Remotes (Up to 3), Metal Control Box
Additional metal control boxes with rocker switches, can be added to unit after the first remote is installed
-
HX-0304 Programmable Logic Controller with First Remote, Metal Control Box
Includes auto start/stop and timed lockout
-
HX-0305 Additional Programmable Logic Controller Remotes, Plastic Control Box
Adds additional remotes to PLC
-
HX-0306 Additional Programmable Logic Controller Remotes, Metal Control Box
Adds additional remotes to PLC
Warranty Information
- 1 Year Electric Motor
- 3 Year Coil
- 7 Year General Pump